Zeile 4: |
Zeile 4: |
| ==Tutorial Videos== | | ==Tutorial Videos== |
| | | |
− | | + | {{#ev:youtubeplaylist|https://www.youtube.com/watch?v=wznkgfifY20&list=PLG0FyUyXMGwEUu4d-HZ1Ox4TKE9ovQLPo|||Youtube Playlist mit Tutorial Videos für den Lasercutter}} |
− | [https://www.youtube.com/watch?v=wznkgfifY20&list=PLG0FyUyXMGwEUu4d-HZ1Ox4TKE9ovQLPo Youtube Playlist mit Tutorial Videos für den Lasercutter]
| |
| | | |
| ==Allgemeines== | | ==Allgemeines== |
Zeile 789: |
Zeile 788: |
| | | | | |
| | | | | |
− |
| |
− | |-
| |
− | | Wellpappe
| |
− | | cut
| |
− | | 40
| |
− | | 11
| |
− | | 90
| |
− | | 530
| |
− | | ✔
| |
− | |
| |
− | |
| |
− |
| |
| | | |
| |- | | |- |
Zeile 806: |
Zeile 793: |
| | cut | | | cut |
| | 60 | | | 60 |
− | | 10 | + | | 8 |
− | | 90 | + | | 100 |
| | 500 | | | 500 |
| | ✔ | | | ✔ |
Zeile 2.041: |
Zeile 2.028: |
| | Fokus manuell auf Mitte gestellt, Schnittstärke ca. 1 mm | | | Fokus manuell auf Mitte gestellt, Schnittstärke ca. 1 mm |
| |- | | |- |
| + | |
| + | | Styropor (expandiertes Polystyrol PS)(20mm) |
| + | | cut |
| + | | 5 |
| + | | 25 |
| + | | 400 |
| + | | yes |
| + | | Fokus -10 mm (Mitte), 2 Passes; Schnittstärke ca. 1 mm --[[Benutzer:Sigfried Arnold|Sigfried Arnold]] ([[Benutzer Diskussion:Sigfried Arnold|Diskussion]]) 19:37, 23. Sep. 2022 (CEST) |
| + | |- |
| + | |
| | | |
| | Styropor (expandiertes Polystyrol PS)(50mm) | | | Styropor (expandiertes Polystyrol PS)(50mm) |
Zeile 2.111: |
Zeile 2.108: |
| | 5 mm | | | 5 mm |
| | cut | | | cut |
− | | 100 | + | | 10 |
− | | 100 | + | | 50 |
− | | 300 | + | | 400 |
| | ✔ | | | ✔ |
| | 1 | | | 1 |
| | 0 mm (manuell) | | | 0 mm (manuell) |
− | | ca 1 mm Schnittbreite --[[User:Sigfried Arnold|Sigfried Arnold]] 11:17, 25 January 2020 (CET) | + | | ca 1 mm Schnittbreite --[[Benutzer:Sigfried Arnold|Sigfried Arnold]] ([[Benutzer Diskussion:Sigfried Arnold|Diskussion]]) 20:36, 23. Sep. 2022 (CEST) |
| | | |
| |- | | |- |
Zeile 2.271: |
Zeile 2.268: |
| | | |
| |- | | |- |
− | | Nappa Ziegenleder | + | | Leder, PU-beschichtet |
− | | cut | + | | engrave |
| + | | 75 |
| + | | 500 |
| + | | 500 |
| + | | ✔ |
| + | | 1 |
| + | | auto |
| + | | 60 W; entfernt die PU-Schicht und dunkelt das Leder etwas ab, ggf. mehr PPI oder etwas defocus, bei größeren Flächen sieht man sonst linien --[[Benutzer:Sigfried Arnold|Sigfried Arnold]] ([[Benutzer Diskussion:Sigfried Arnold|Diskussion]]) |
| + | |
| + | |
| + | |- |
| + | | Nappa Ziegenleder |
| + | | cut |
| | 5 | | | 5 |
| | 31 | | | 31 |
Zeile 2.330: |
Zeile 2.339: |
| | mark | | | mark |
| | 100 | | | 100 |
− | | 90 | + | | 100 |
| | 1000 | | | 1000 |
| | yes | | | yes |
Zeile 2.354: |
Zeile 2.363: |
| | yes | | | yes |
| | autofocus; --[[User:Sigfried Arnold|Sigfried Arnold]] 16:05, 31 January 2020 (CET) | | | autofocus; --[[User:Sigfried Arnold|Sigfried Arnold]] 16:05, 31 January 2020 (CET) |
| + | |
| + | |
| + | |- |
| + | | Acrylglas / PMMA (1 mm) |
| + | | cut |
| + | | 7,0 |
| + | | 75 |
| + | | 850 |
| + | | yes |
| + | | |
| | | |
| |- | | |- |
− | | Acrylglas / PMMA (~ 1,2 mm) | + | | Acrylglas / PMMA (1,5 mm) |
− | | engrave | + | | cut |
− | | 20 | + | | 1,4 |
| | 90 | | | 90 |
− | | 500 | + | | 1000 |
| | yes | | | yes |
− | | autofocus; --[[User:Sigfried Arnold|Sigfried Arnold]] 16:05, 31 January 2020 (CET) | + | | Fokus: -0,5mm |
| + | Weiße Acrylplatte von Archidelis, hinterlässt leichte Rußspuren, |
| + | evtl. langsamer: kommt bei großem Auftrag nicht immer durch |
| | | |
| |- | | |- |
− | | Acrylglas / PMMA (~ 2 mm) | + | | Acrylglas / PMMA (~ 1,5 mm) |
| | engrave | | | engrave |
| | 10 | | | 10 |
Zeile 2.371: |
Zeile 2.392: |
| | 500 | | | 500 |
| | yes | | | yes |
− | | autofocus; --[[User:Sigfried Arnold|Sigfried Arnold]] 16:05, 31 January 2020 (CET) | + | | autofocus; --[[User:Sigfried Arnold|Sigfried Arnold]] 10:08, 15 January 2021 (CET) |
| | | |
| |- | | |- |
− | | Acrylglas / PMMA (~ 4 mm)
| + | | Acrylglas / PMMA (2 mm) |
− | | engrave
| |
− | | 5
| |
− | | 90
| |
− | | 500
| |
− | | yes
| |
− | | autofocus; Boden der Gravur ist verformt und hat ein Interferenz-Muster --[[User:Sigfried Arnold|Sigfried Arnold]] 18:54, 19 February 2020 (CET)
| |
− | | |
− | |-
| |
− | | Acrylglas / PMMA (1 mm)
| |
− | | cut
| |
− | | 2,7
| |
− | | 90
| |
− | | 850
| |
− | | yes
| |
− | | Achtung alter Wert für 40 Watt Laser. Für 60 Watt 7.0/75/850 [Andreas]
| |
− | | |
− | |-
| |
− | | Acrylglas / PMMA (1,5 mm)
| |
− | | cut
| |
− | | 1,4
| |
− | | 90
| |
− | | 1000
| |
− | | yes
| |
− | | Fokus: -0,5mm
| |
− | Weiße Acrylplatte von Archidelis, hinterlässt leichte Rußspuren,
| |
− | evtl. langsamer: kommt bei großem Auftrag nicht immer durch
| |
− | | |
− | |-
| |
− | | Acrylglas / PMMA (1,5 mm)
| |
− | | engrave
| |
− | | 40
| |
− | | 50
| |
− | | 550
| |
− | | no
| |
− | | Geändert Simon; hat durchgeschnitten
| |
− | | |
− | |-
| |
− | | Acrylglas / PMMA (2 mm) | |
| | cut | | | cut |
| | 1,7 | | | 1,7 |
Zeile 2.426: |
Zeile 2.409: |
| | 1000 | | | 1000 |
| | yes | | | yes |
− | | autofocus für neuen 60W Laser, kommt auch bei leicht verdreckten spiegeln durch. 760 DPI | + | | autofocus; --[[User:Sigfried Arnold|Sigfried Arnold]] 10:26, 15 January 2021 (CET) |
− | | |
− | |-
| |
− | | Acrylglas / PMMA (3 mm) | |
− | | engrave
| |
− | | 90
| |
− | | 40
| |
− | | 500
| |
− | | yes
| |
− | | für neuen 60W Laser, feine und nicht zu tiefe Gravur. 760 DPI
| |
| | | |
| |- | | |- |
| | Acrylglas / PMMA (4 mm) | | | Acrylglas / PMMA (4 mm) |
| | cut | | | cut |
− | | 2 | + | | 1,2 |
− | | 90 | + | | 100 |
− | | 1000 | + | | 1500 |
| | yes | | | yes |
| | Fokus: -2.0mm; für 60 Watt | | | Fokus: -2.0mm; für 60 Watt |
Zeile 2.451: |
Zeile 2.425: |
| | cut | | | cut |
| | 1,2 | | | 1,2 |
− | | 90 | + | | 100 |
| | 1000 | | | 1000 |
| | yes | | | yes |
Zeile 2.459: |
Zeile 2.433: |
| | Acrylglas / PMMA (5 mm) | | | Acrylglas / PMMA (5 mm) |
| | cut | | | cut |
− | | 0,5 | + | | 0,4 |
− | | 90 | + | | 100 |
| | 1000 | | | 1000 |
| | yes | | | yes |
− | | autofocus; schneidet knapp durch, ggf. etwas langsamer --[[User:Sigfried Arnold|Sigfried Arnold]] 16:59, 7 February 2020 (CET) | + | | autofocus; --[[User:Sigfried Arnold|Sigfried Arnold]] 10:09, 15 January 2021 (CET) |
| | | |
| | | |
Zeile 2.470: |
Zeile 2.444: |
| | cut | | | cut |
| | 0,8 | | | 0,8 |
− | | 90 | + | | 100 |
| | 1000 | | | 1000 |
| | yes | | | yes |
Zeile 2.479: |
Zeile 2.453: |
| | cut | | | cut |
| | 0,5 | | | 0,5 |
− | | 90 | + | | 100 |
| | 1500 | | | 1500 |
| | yes | | | yes |
Zeile 2.490: |
Zeile 2.464: |
| | cut | | | cut |
| | 0,5 | | | 0,5 |
− | | 90 | + | | 100 |
| | 1500 | | | 1500 |
| | yes | | | yes |
Zeile 2.500: |
Zeile 2.474: |
| | cut | | | cut |
| | 0,5 | | | 0,5 |
− | | 90 | + | | 100 |
| | 1500 | | | 1500 |
| | yes | | | yes |
Zeile 2.660: |
Zeile 2.634: |
| | cut | | | cut |
| | 3 | | | 3 |
− | | 60 | + | | 75 |
| | 400 | | | 400 |
| | yes | | | yes |
− | | für 60 Watt | + | | für 60 Watt --[[User:Sigfried Arnold|Sigfried Arnold]] 19:17, 12 May 2021 (CEST) |
| |- | | |- |
| | | |