Änderungen

== Hardware ==

== Hardware ==

[[FooBoard_SMD]]: an Arduino compatible Breakout-Board for Atmega8/168/328… based on SMD parts. [[Media:]]

[[FooBoard_SMD]]: an Arduino compatible Breakout-Board for Atmega8/168/328… based on SMD parts.

[[AR1010 Breakout Board]]: a breakout board i made for the AR1010 module (sparkfun/watterott, currently difficult to get unfortunately). [[Media:]]

[[AR1010 Breakout Board]]: a breakout board i made for the AR1010 module ([http://www.watterott.com/de/UKW-Empfaenger-AR1010 AR1010 Module], currently difficult to get unfortunately).

The general Audio Amp from Jonathan Lock (unfortunately could not find original blog url any more) i modified for 1206 SMD components for easier soldering (instead of 0603 as in the original). [[Media:Radio_amp.zip]]

The general Audio Amp from Jonathan Lock (unfortunately could not find original blog url any more) i modified for 1206 SMD components for easier soldering (instead of 0603 as in the original). [[Media:Radio_amp.zip]]

The case was built from 3 boards of laminated wood of size 170x250mm, and 18mm height. The front panel design (holes for the speakers) was generated with a magnetic particle system with particles of different weight and size. The application uses the OpenFrameworks (Version XXX) libraries + some of my own libraries (Code). The boards where then milled on a 3 axis cnc-router. [[Media:Case_dxf_gcode.zip]]

The case was built from 3 boards of laminated wood of size 170x250mm, and 18mm height. The front panel design (holes for the speakers) was generated with a magnetic particle system with particles of different weight and size. The boards where then milled on a 3 axis cnc-router. [[Media:Case_dxf_gcode.zip]]

[[File:Radio_due_back.JPG|400px]]

[[File:Radio_due_back.JPG|400px]]