Änderungen

1.763 Bytes hinzugefügt ,  12:47, 10. Jän 2011
Created page with "400px Radio due is a (digital) radio, that only plays the two stations we most of the time listen to at home. There is a switch for On/Off, a seco..."
[[File:Radio_due_front_1.JPG|400px]]

Radio due is a (digital) radio, that only plays the two stations we most of the time listen to at home. There is a switch for On/Off, a second one to switch between the two stations and a volume knob. That's all.

== Software ==


Written using the Arduino API and the AR1010 library from [http://phd.adamjansch.co.uk/doku.php/software/ar1010-arduino-library Adam Jansch]. The frequencies are hardcoded to Deutschlandfunk and Deutschlandradio Kultur for Berlin Kreuzberg. Code: [[Media:Radio_due.zip]]

== Hardware ==

[[FooBoard_SMD]]: an Arduino compatible Breakout-Board for Atmega8/168/328… based on SMD parts. [[Media:]]

[[AR1010 Breakout Board]]: a breakout board i made for the AR1010 module (sparkfun/watterott, currently difficult to get unfortunately). [[Media:]]

The general Audio Amp from Jonathan Lock (unfortunately could not find original blog url any more) i modified for 1206 SMD components for easier soldering (instead of 0603 as in the original). [[Media:Radio_amp.zip]]

The case was built from 3 boards of laminated wood of size 170x250mm, and 18mm height. The front panel design (holes for the speakers) was generated with a magnetic particle system with particles of different weight and size. The application uses the OpenFrameworks (Version XXX) libraries + some of my own libraries (Code). The boards where then milled on a 3 axis cnc-router. [[Media:Case_dxf_gcode.zip]]


== Downloads ==

Code: [[Media:Radio_due.zip]]

Fooboard_smd: [[Media:FooBoard_smd.zip]]

AR1010_breakout [[Media:Ar1010_breakout.zip]]

audio amp [[Media:Radio_amp.zip]]

Case (dxf, gcode files) [[Media:Case_dxf_gcode.zip]]


== More Pictures ==

[[File:Radio_due_front_2.JPG|400px]]

[[File:Radio_due_back.JPG|400px]]
26

Bearbeitungen