Solar Arduino tracker
German version Sonnenstandsberechner (für sun tracker devices)
General considerations
For calculation the solar position with a microcontroller (on a fixed geographic place) you have to solve two problems: The controller needs a time device (typically a battery buffered chip like in a PC) and it needs a reasonably simple algorithm to calculate solar azimuth and elevation from date, time and geographic position (longitude and latitude). An algorithm which works on a PC might have problems on a microcontroller. For instance, on Arduino you must take into account that double data type has the same precision as float (IEEE 23 bit mantissa)
Get the Time
To get Greenwich Time (aka UT) I use a DS1307 chip. Following the description of http://www.glacialwanderer.com/hobbyrobotics/?p=12 it worked immediately. Did not find any 2.2K resistors, 4.7K ones are just as fine. I have taken the code from that site and tucked the complexity into an Arduino libary (DS1307.h)
Calculate Azimuth and Elevation
The formulas for exact calculation of solar azimuth and elevation are very involved. However, for practical purposes like sun tracking of a heliostat there are simpler ones available. Widely used formulas for solar tracking are the one from the so called PSA-algorithm. It has been made avaible from Plataforma Solar de Almeria (Spain) and you can download it here as C++ code. There are adaptions neccessary for Arduino, though. The formulas for calculating the Juliand Day are not working properly on Arduino due to reduced double precision. Therefore, I have adapted them, expecting only Julians dates starting from 1.Jan. 2000. These calculations I have put into another library (Helios.h)
SPA Algorithm
A much more accurate solar algorithm seems to be from Reda, I.; Andreas, A. (2003): Solar Position Algorithm for Solar Radiation Applications. NREL Report No. TP-560-34302, Revised January 2008. The algorithm is supposed to work for the years -2000 to 6000, with uncertainties of +/-0.0003 degrees. In this paper methods have been worked out according to the book from Jean Meeus: Astronomical Algorithms, Willmann-Bell, Richmond 2000 (2nd ed., 2nd printing) a widely accepted text book for astronomic calculations. The calculations are, however, very extensive; for Arduino I chose the simpler PSA. Implementations and references for both algorithms I found thanks to the code from Klaus Brunner. It was also a valuable help for debugging the Arduino implementation. --Hannes.hassler 13:36, 3 March 2011 (CET)