{
  "1": {
    "name": "Isolieren Gravierfr\u00e4ser 30\u00b0",
    "tooldia": 0.1875,
    "offset": "Path",
    "offset_value": 0.0,
    "type": "Iso",
    "tool_type": "V",
    "data": {
      "plot": true,
      "tool_target": 3,
      "tol_min": 0.0,
      "tol_max": 0.0,
      "cutz": -0.07,
      "multidepth": false,
      "depthperpass": 0.8,
      "vtipdia": 0.15,
      "vtipangle": 30.0,
      "travelz": 1.0,
      "feedrate": 500.0,
      "feedrate_z": 60.0,
      "feedrate_rapid": 1500.0,
      "spindlespeed": 15000,
      "dwell": false,
      "dwelltime": 1.0,
      "ppname_g": "default",
      "extracut": false,
      "extracut_length": 0.1,
      "toolchange": false,
      "toolchangexy": [
        0.0,
        0.0
      ],
      "toolchangez": 15.0,
      "startz": null,
      "endz": 15.0,
      "endxy": null,
      "search_time": 3,
      "z_pdepth": -0.02,
      "f_plunge": 0.0,
      "spindledir": "CW",
      "optimization_type": "R",
      "feedrate_probe": 75,
      "segx": 0.0,
      "segy": 0.0,
      "area_exclusion": false,
      "area_shape": "polygon",
      "area_strategy": "over",
      "area_overz": 1.0,
      "polish": false,
      "polish_dia": 10.0,
      "polish_pressure": -1.0,
      "polish_travelz": 2.0,
      "polish_margin": 0.0,
      "polish_overlap": 5,
      "polish_method": 0,
      "tools_ncc_operation": "clear",
      "tools_ncc_milling_type": "cl",
      "tools_ncc_overlap": 40.0,
      "tools_ncc_margin": 1.0,
      "tools_ncc_method": 1,
      "tools_ncc_connect": true,
      "tools_ncc_contour": true,
      "tools_ncc_offset_choice": false,
      "tools_ncc_offset_value": 0.0,
      "tools_paint_overlap": 20.0,
      "tools_paint_offset": 0.0,
      "tools_paint_method": 0,
      "tools_paint_connect": true,
      "tools_paint_contour": true,
      "tools_iso_passes": 3,
      "tools_iso_overlap": 10.0,
      "tools_iso_milling_type": "cl",
      "tools_iso_follow": false,
      "tools_iso_isotype": "full",
      "tools_drill_cutz": -1.6,
      "tools_drill_multidepth": false,
      "tools_drill_depthperpass": 0.7,
      "tools_drill_travelz": 2.0,
      "tools_drill_feedrate_z": 300.0,
      "tools_drill_feedrate_rapid": 1500.0,
      "tools_drill_spindlespeed": 15000.0,
      "tools_drill_dwell": false,
      "tools_drill_offset": 0.0,
      "tools_drill_drill_slots": false,
      "tools_drill_drill_overlap": 0.0,
      "tools_drill_last_drill": true,
      "tools_cutout_margin": 0.1,
      "tools_cutout_gapsize": 2.0,
      "tools_cutout_gaps_ff": "4",
      "tools_cutout_convexshape": false,
      "tools_cutout_gap_type": "b",
      "tools_cutout_gap_depth": -1.8,
      "tools_cutout_mb_dia": 0.8,
      "tools_cutout_mb_spacing": 0.3
    }
  },
  "2": {
    "name": "VHM 1mm Fr\u00e4ser diamantverzahnt",
    "tooldia": 1.0,
    "offset": "Path",
    "offset_value": 0.0,
    "type": "Rough",
    "tool_type": "C1",
    "data": {
      "plot": true,
      "tool_target": 0,
      "tol_min": 0.0,
      "tol_max": 0.0,
      "cutz": -1.7,
      "multidepth": true,
      "depthperpass": 0.9,
      "vtipdia": 0.1,
      "vtipangle": 30.0,
      "travelz": 1.0,
      "feedrate": 300.0,
      "feedrate_z": 100.0,
      "feedrate_rapid": 1500.0,
      "spindlespeed": 15000,
      "dwell": false,
      "dwelltime": 1.0,
      "ppname_g": "default",
      "extracut": false,
      "extracut_length": 0.1,
      "toolchange": false,
      "toolchangexy": [
        0.0,
        0.0
      ],
      "toolchangez": 15.0,
      "startz": null,
      "endz": 15.0,
      "endxy": null,
      "search_time": 3,
      "z_pdepth": -0.02,
      "f_plunge": 0.0,
      "spindledir": "CW",
      "optimization_type": "R",
      "feedrate_probe": 75,
      "segx": 0.0,
      "segy": 0.0,
      "area_exclusion": false,
      "area_shape": "polygon",
      "area_strategy": "over",
      "area_overz": 1.0,
      "polish": false,
      "polish_dia": 10.0,
      "polish_pressure": -1.0,
      "polish_travelz": 2.0,
      "polish_margin": 0.0,
      "polish_overlap": 5,
      "polish_method": 0,
      "tools_ncc_operation": "clear",
      "tools_ncc_milling_type": "cl",
      "tools_ncc_overlap": 40.0,
      "tools_ncc_margin": 1.0,
      "tools_ncc_method": 1,
      "tools_ncc_connect": true,
      "tools_ncc_contour": true,
      "tools_ncc_offset_choice": false,
      "tools_ncc_offset_value": 0.0,
      "tools_paint_overlap": 20.0,
      "tools_paint_offset": 0.0,
      "tools_paint_method": 0,
      "tools_paint_connect": true,
      "tools_paint_contour": true,
      "tools_iso_passes": 1,
      "tools_iso_overlap": 10.0,
      "tools_iso_milling_type": "cl",
      "tools_iso_follow": false,
      "tools_iso_isotype": "full",
      "tools_drill_cutz": -1.6,
      "tools_drill_multidepth": false,
      "tools_drill_depthperpass": 0.8,
      "tools_drill_travelz": 2.0,
      "tools_drill_feedrate_z": 300.0,
      "tools_drill_feedrate_rapid": 1500.0,
      "tools_drill_spindlespeed": 15000.0,
      "tools_drill_dwell": false,
      "tools_drill_offset": 0.0,
      "tools_drill_drill_slots": true,
      "tools_drill_drill_overlap": 0.0,
      "tools_drill_last_drill": true,
      "tools_cutout_margin": 0.1,
      "tools_cutout_gapsize": 2.0,
      "tools_cutout_gaps_ff": "4",
      "tools_cutout_convexshape": true,
      "tools_cutout_gap_type": "bt",
      "tools_cutout_gap_depth": -1.0,
      "tools_cutout_mb_dia": 1.0,
      "tools_cutout_mb_spacing": 0.3
    }
  },
  "3": {
    "name": "VHM 2mm Fr\u00e4ser diamantverzahnt",
    "tooldia": 2.0,
    "offset": "Path",
    "offset_value": 0.0,
    "type": "Rough",
    "tool_type": "C1",
    "data": {
      "plot": true,
      "tool_target": 0,
      "tol_min": 0.0,
      "tol_max": 0.0,
      "cutz": -1.7,
      "multidepth": false,
      "depthperpass": 0.9,
      "vtipdia": 0.1,
      "vtipangle": 30.0,
      "travelz": 1.0,
      "feedrate": 600.0,
      "feedrate_z": 200.0,
      "feedrate_rapid": 1500.0,
      "spindlespeed": 15000.0,
      "dwell": false,
      "dwelltime": 1.0,
      "ppname_g": "default",
      "extracut": false,
      "extracut_length": 0.1,
      "toolchange": false,
      "toolchangexy": [
        0.0,
        0.0
      ],
      "toolchangez": 15.0,
      "startz": null,
      "endz": 15.0,
      "endxy": null,
      "search_time": 3,
      "z_pdepth": -0.02,
      "f_plunge": 0.0,
      "spindledir": "CW",
      "optimization_type": "R",
      "feedrate_probe": 75,
      "segx": 0.0,
      "segy": 0.0,
      "area_exclusion": false,
      "area_shape": "polygon",
      "area_strategy": "over",
      "area_overz": 1.0,
      "polish": false,
      "polish_dia": 10.0,
      "polish_pressure": -1.0,
      "polish_travelz": 2.0,
      "polish_margin": 0.0,
      "polish_overlap": 5,
      "polish_method": 0,
      "tools_ncc_operation": "clear",
      "tools_ncc_milling_type": "cl",
      "tools_ncc_overlap": 40.0,
      "tools_ncc_margin": 1.0,
      "tools_ncc_method": 1,
      "tools_ncc_connect": true,
      "tools_ncc_contour": true,
      "tools_ncc_offset_choice": false,
      "tools_ncc_offset_value": 0.0,
      "tools_paint_overlap": 20.0,
      "tools_paint_offset": 0.0,
      "tools_paint_method": 0,
      "tools_paint_connect": true,
      "tools_paint_contour": true,
      "tools_iso_passes": 1,
      "tools_iso_overlap": 10.0,
      "tools_iso_milling_type": "cl",
      "tools_iso_follow": false,
      "tools_iso_isotype": "full",
      "tools_drill_cutz": -1.7,
      "tools_drill_multidepth": false,
      "tools_drill_depthperpass": 0.7,
      "tools_drill_travelz": 2.0,
      "tools_drill_feedrate_z": 300.0,
      "tools_drill_feedrate_rapid": 1500.0,
      "tools_drill_spindlespeed": 15000,
      "tools_drill_dwell": false,
      "tools_drill_offset": 0.0,
      "tools_drill_drill_slots": true,
      "tools_drill_drill_overlap": 0.0,
      "tools_drill_last_drill": true,
      "tools_cutout_margin": 0.1,
      "tools_cutout_gapsize": 2.0,
      "tools_cutout_gaps_ff": "4",
      "tools_cutout_convexshape": true,
      "tools_cutout_gap_type": "bt",
      "tools_cutout_gap_depth": -1.0,
      "tools_cutout_mb_dia": 2.0,
      "tools_cutout_mb_spacing": 0.3
    }
  },
  "4": {
    "name": "VHM 3mm Fr\u00e4ser diamantverzahnt",
    "tooldia": 3.0,
    "offset": "Path",
    "offset_value": 0.0,
    "type": "Rough",
    "tool_type": "C1",
    "data": {
      "plot": true,
      "tool_target": 0,
      "tol_min": 0.0,
      "tol_max": 0.0,
      "cutz": -1.6,
      "multidepth": false,
      "depthperpass": 0.8,
      "vtipdia": 0.1,
      "vtipangle": 30.0,
      "travelz": 1.0,
      "feedrate": 900.0,
      "feedrate_z": 400.0,
      "feedrate_rapid": 1500.0,
      "spindlespeed": 15000,
      "dwell": false,
      "dwelltime": 1.0,
      "ppname_g": "default",
      "extracut": false,
      "extracut_length": 0.1,
      "toolchange": false,
      "toolchangexy": [
        0.0,
        0.0
      ],
      "toolchangez": 15.0,
      "startz": null,
      "endz": 15.0,
      "endxy": null,
      "search_time": 3,
      "z_pdepth": -0.02,
      "f_plunge": 0.0,
      "spindledir": "CW",
      "optimization_type": "R",
      "feedrate_probe": 75,
      "segx": 0.0,
      "segy": 0.0,
      "area_exclusion": false,
      "area_shape": "polygon",
      "area_strategy": "over",
      "area_overz": 1.0,
      "polish": false,
      "polish_dia": 10.0,
      "polish_pressure": -1.0,
      "polish_travelz": 2.0,
      "polish_margin": 0.0,
      "polish_overlap": 5,
      "polish_method": 0,
      "tools_ncc_operation": "clear",
      "tools_ncc_milling_type": "cl",
      "tools_ncc_overlap": 40.0,
      "tools_ncc_margin": 1.0,
      "tools_ncc_method": 1,
      "tools_ncc_connect": true,
      "tools_ncc_contour": true,
      "tools_ncc_offset_choice": false,
      "tools_ncc_offset_value": 0.0,
      "tools_paint_overlap": 20.0,
      "tools_paint_offset": 0.0,
      "tools_paint_method": 0,
      "tools_paint_connect": true,
      "tools_paint_contour": true,
      "tools_iso_passes": 1,
      "tools_iso_overlap": 10.0,
      "tools_iso_milling_type": "cl",
      "tools_iso_follow": false,
      "tools_iso_isotype": "full",
      "tools_drill_cutz": -1.8,
      "tools_drill_multidepth": false,
      "tools_drill_depthperpass": 0.7,
      "tools_drill_travelz": 2.0,
      "tools_drill_feedrate_z": 300.0,
      "tools_drill_feedrate_rapid": 1500.0,
      "tools_drill_spindlespeed": 15000.0,
      "tools_drill_dwell": false,
      "tools_drill_offset": 0.0,
      "tools_drill_drill_slots": true,
      "tools_drill_drill_overlap": 0.0,
      "tools_drill_last_drill": true,
      "tools_cutout_margin": 0.1,
      "tools_cutout_gapsize": 2.0,
      "tools_cutout_gaps_ff": "4",
      "tools_cutout_convexshape": true,
      "tools_cutout_gap_type": "bt",
      "tools_cutout_gap_depth": -1.0,
      "tools_cutout_mb_dia": 3.0,
      "tools_cutout_mb_spacing": 0.3
    }
  },
  "5": {
    "name": "VHM Bohrer 0,8mm",
    "tooldia": 0.8,
    "offset": "Path",
    "offset_value": 0.0,
    "type": "Rough",
    "tool_type": "C1",
    "data": {
      "plot": true,
      "tool_target": 2,
      "tol_min": 0.0,
      "tol_max": 0.0,
      "cutz": -1.7,
      "multidepth": true,
      "depthperpass": 0.9,
      "vtipdia": 0.1,
      "vtipangle": 30.0,
      "travelz": 2.0,
      "feedrate": 120.0,
      "feedrate_z": 60.0,
      "feedrate_rapid": 1500.0,
      "spindlespeed": 0,
      "dwell": false,
      "dwelltime": 1.0,
      "ppname_g": "default",
      "extracut": false,
      "extracut_length": 0.1,
      "toolchange": false,
      "toolchangexy": [
        0.0,
        0.0
      ],
      "toolchangez": 15.0,
      "startz": null,
      "endz": 15.0,
      "endxy": null,
      "search_time": 3,
      "z_pdepth": -0.02,
      "f_plunge": 0.0,
      "spindledir": "CW",
      "optimization_type": "R",
      "feedrate_probe": 75,
      "segx": 0.0,
      "segy": 0.0,
      "area_exclusion": false,
      "area_shape": "polygon",
      "area_strategy": "over",
      "area_overz": 1.0,
      "polish": false,
      "polish_dia": 10.0,
      "polish_pressure": -1.0,
      "polish_travelz": 2.0,
      "polish_margin": 0.0,
      "polish_overlap": 5,
      "polish_method": 0,
      "tools_ncc_operation": "clear",
      "tools_ncc_milling_type": "cl",
      "tools_ncc_overlap": 40.0,
      "tools_ncc_margin": 1.0,
      "tools_ncc_method": 1,
      "tools_ncc_connect": true,
      "tools_ncc_contour": true,
      "tools_ncc_offset_choice": false,
      "tools_ncc_offset_value": 0.0,
      "tools_paint_overlap": 20.0,
      "tools_paint_offset": 0.0,
      "tools_paint_method": 0,
      "tools_paint_connect": true,
      "tools_paint_contour": true,
      "tools_iso_passes": 1,
      "tools_iso_overlap": 10.0,
      "tools_iso_milling_type": "cl",
      "tools_iso_follow": false,
      "tools_iso_isotype": "full",
      "tools_drill_cutz": -1.7,
      "tools_drill_multidepth": false,
      "tools_drill_depthperpass": 0.7,
      "tools_drill_travelz": 1.0,
      "tools_drill_feedrate_z": 300.0,
      "tools_drill_feedrate_rapid": 1500.0,
      "tools_drill_spindlespeed": 15000,
      "tools_drill_dwell": false,
      "tools_drill_offset": 0.0,
      "tools_drill_drill_slots": false,
      "tools_drill_drill_overlap": 0.0,
      "tools_drill_last_drill": true,
      "tools_cutout_margin": 0.1,
      "tools_cutout_gapsize": 4.0,
      "tools_cutout_gaps_ff": "4",
      "tools_cutout_convexshape": false,
      "tools_cutout_gap_type": "b",
      "tools_cutout_gap_depth": -1.0,
      "tools_cutout_mb_dia": 0.6,
      "tools_cutout_mb_spacing": 0.3
    }
  },
  "6": {
    "name": "VHM Bohrer 1mm",
    "tooldia": 1.0,
    "offset": "Path",
    "offset_value": 0.0,
    "type": "Rough",
    "tool_type": "C1",
    "data": {
      "plot": true,
      "tool_target": 2,
      "tol_min": 0.0,
      "tol_max": 0.0,
      "cutz": -1.7,
      "multidepth": true,
      "depthperpass": 0.9,
      "vtipdia": 0.1,
      "vtipangle": 30.0,
      "travelz": 2.0,
      "feedrate": 120.0,
      "feedrate_z": 60.0,
      "feedrate_rapid": 1500.0,
      "spindlespeed": 0,
      "dwell": false,
      "dwelltime": 1.0,
      "ppname_g": "default",
      "extracut": false,
      "extracut_length": 0.1,
      "toolchange": false,
      "toolchangexy": [
        0.0,
        0.0
      ],
      "toolchangez": 15.0,
      "startz": null,
      "endz": 15.0,
      "endxy": null,
      "search_time": 3,
      "z_pdepth": -0.02,
      "f_plunge": 0.0,
      "spindledir": "CW",
      "optimization_type": "R",
      "feedrate_probe": 75,
      "segx": 0.0,
      "segy": 0.0,
      "area_exclusion": false,
      "area_shape": "polygon",
      "area_strategy": "over",
      "area_overz": 1.0,
      "polish": false,
      "polish_dia": 10.0,
      "polish_pressure": -1.0,
      "polish_travelz": 2.0,
      "polish_margin": 0.0,
      "polish_overlap": 5,
      "polish_method": 0,
      "tools_ncc_operation": "clear",
      "tools_ncc_milling_type": "cl",
      "tools_ncc_overlap": 40.0,
      "tools_ncc_margin": 1.0,
      "tools_ncc_method": 1,
      "tools_ncc_connect": true,
      "tools_ncc_contour": true,
      "tools_ncc_offset_choice": false,
      "tools_ncc_offset_value": 0.0,
      "tools_paint_overlap": 20.0,
      "tools_paint_offset": 0.0,
      "tools_paint_method": 0,
      "tools_paint_connect": true,
      "tools_paint_contour": true,
      "tools_iso_passes": 1,
      "tools_iso_overlap": 10.0,
      "tools_iso_milling_type": "cl",
      "tools_iso_follow": false,
      "tools_iso_isotype": "full",
      "tools_drill_cutz": -1.7,
      "tools_drill_multidepth": false,
      "tools_drill_depthperpass": 0.7,
      "tools_drill_travelz": 1.0,
      "tools_drill_feedrate_z": 300.0,
      "tools_drill_feedrate_rapid": 1500.0,
      "tools_drill_spindlespeed": 15000,
      "tools_drill_dwell": false,
      "tools_drill_offset": 0.0,
      "tools_drill_drill_slots": false,
      "tools_drill_drill_overlap": 0.0,
      "tools_drill_last_drill": true,
      "tools_cutout_margin": 0.1,
      "tools_cutout_gapsize": 4.0,
      "tools_cutout_gaps_ff": "4",
      "tools_cutout_convexshape": false,
      "tools_cutout_gap_type": "b",
      "tools_cutout_gap_depth": -1.0,
      "tools_cutout_mb_dia": 0.6,
      "tools_cutout_mb_spacing": 0.3
    }
  },
  "7": {
    "name": "VHM Bohrer 1,4mm",
    "tooldia": 1.4,
    "offset": "Path",
    "offset_value": 0.0,
    "type": "Rough",
    "tool_type": "C1",
    "data": {
      "plot": true,
      "tool_target": 2,
      "tol_min": 0.0,
      "tol_max": 0.0,
      "cutz": -1.7,
      "multidepth": true,
      "depthperpass": 0.9,
      "vtipdia": 0.1,
      "vtipangle": 30.0,
      "travelz": 2.0,
      "feedrate": 120.0,
      "feedrate_z": 60.0,
      "feedrate_rapid": 1500.0,
      "spindlespeed": 0,
      "dwell": false,
      "dwelltime": 1.0,
      "ppname_g": "default",
      "extracut": false,
      "extracut_length": 0.1,
      "toolchange": false,
      "toolchangexy": [
        0.0,
        0.0
      ],
      "toolchangez": 15.0,
      "startz": null,
      "endz": 15.0,
      "endxy": null,
      "search_time": 3,
      "z_pdepth": -0.02,
      "f_plunge": 0.0,
      "spindledir": "CW",
      "optimization_type": "R",
      "feedrate_probe": 75,
      "segx": 0.0,
      "segy": 0.0,
      "area_exclusion": false,
      "area_shape": "polygon",
      "area_strategy": "over",
      "area_overz": 1.0,
      "polish": false,
      "polish_dia": 10.0,
      "polish_pressure": -1.0,
      "polish_travelz": 2.0,
      "polish_margin": 0.0,
      "polish_overlap": 5,
      "polish_method": 0,
      "tools_ncc_operation": "clear",
      "tools_ncc_milling_type": "cl",
      "tools_ncc_overlap": 40.0,
      "tools_ncc_margin": 1.0,
      "tools_ncc_method": 1,
      "tools_ncc_connect": true,
      "tools_ncc_contour": true,
      "tools_ncc_offset_choice": false,
      "tools_ncc_offset_value": 0.0,
      "tools_paint_overlap": 20.0,
      "tools_paint_offset": 0.0,
      "tools_paint_method": 0,
      "tools_paint_connect": true,
      "tools_paint_contour": true,
      "tools_iso_passes": 1,
      "tools_iso_overlap": 10.0,
      "tools_iso_milling_type": "cl",
      "tools_iso_follow": false,
      "tools_iso_isotype": "full",
      "tools_drill_cutz": -1.7,
      "tools_drill_multidepth": false,
      "tools_drill_depthperpass": 0.7,
      "tools_drill_travelz": 1.0,
      "tools_drill_feedrate_z": 300.0,
      "tools_drill_feedrate_rapid": 1500.0,
      "tools_drill_spindlespeed": 15000,
      "tools_drill_dwell": false,
      "tools_drill_offset": 0.0,
      "tools_drill_drill_slots": false,
      "tools_drill_drill_overlap": 0.0,
      "tools_drill_last_drill": true,
      "tools_cutout_margin": 0.1,
      "tools_cutout_gapsize": 4.0,
      "tools_cutout_gaps_ff": "4",
      "tools_cutout_convexshape": false,
      "tools_cutout_gap_type": "b",
      "tools_cutout_gap_depth": -1.0,
      "tools_cutout_mb_dia": 0.6,
      "tools_cutout_mb_spacing": 0.3
    }
  }
}